Overview

Category 6A 10G Screened Jacks are designed for the same high level of performance standards as our unscreened (UTP) jacks. This uniquely designed connector features a toolless termination method for quick and easy installation. The connectors contact design provides enhanced plug-to-jack connection integrity and is rated for a minimum of 750 plug insertions providing for the highest level of reliability. Jacks are fully shielded to optimize protection from EMI including alien crosstalk.

?

Category 6A screened keystone jacks are compatible with Signamax keystone faceplates, surface mount boxes, and 24- and 48-port screened snap-in patch panels providing flexibility in field installation and easy connection to the telecommunications bonding and grounding system.

Key Features

• Designed to meet 10G IEEE 802.3an transmission requirements
• Support category 6A 100-meter channel performance
• Guaranteed to meet or exceed TIA-568-C.2 channel performance
• Overall solid screened design
• Compatible with Signamax screened snap-in patch panels
• Rated for at least 750 plug insertions providing for the highest level of system reliability
• Contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 po-sition plugs
• T568A and T568B wiring with an easy to read color-code wiring label for maximum flexibility
• 110-type contacts provide improved wire retention and ease of termination
• Terminated with tool-less termination cap

Specifications

• TRANSMISSION PERFORMANCE

ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1 - 500 MHz) channel specifications

• TRANSMISSION MEDIA

Unscreened or screened twisted pair (UTP/ScTP/FTP/SFTP)

• JACK TYPE

8p8c (8-position, 8-contact) "RJ45" type

• WIRING SCHEME

ANSI/TIA/EIA-568-B.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

• WIRE GAUGE

22-24 AWG (0.644 - 0.511 mm)

• ELECTRICAL

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
1,500 Vdc/ac peak contact to panel @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm

• CONSTRUCTION

Housing: zinc-alloy fully shielded
Jack spring wire: phosphor bronze alloy plated with 50 ?in of gold over 70-100 ?in of nickel
IDC: 110 type, phosphor bronze alloy with 100 ?in 100% tin alloy

• MECHANICAL

Total contact force: min 800 g for 8 wire leads
Retention: 50 N (11 lbf) for 60?5 s
Mating cycle life: min 750 cycles

• FOOTPRINT

Standard keystone footprint

• MOUNTING DIMENSIONS

D 41.8 mm H 19.3 mm W 17.0 mm
D 1.65 in H 0.76 in W 0.67 in

• ENVIRONMENTAL CONDITIONS

Storage: -40?C - +70?C (-40?F - +158?F)
Operation: -10?C - +60?C (+14?F - +140?F)
RH (operation): max non-condensing 93%

• COMPLIANCE

ANSI/TIA-568-C.2, IEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, IEC 60603-7

• APPLICATIONS

X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

• WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty

Downloads

Ordering Information