Overview

Signamax Connectivity Systems? model 065-1096 Gigabit Ethernet Media Converter is a 10/100/1000BaseT/TX to 1000Base SFP converter that utilizes Small Form-factor Pluggable (SFP) Gigabit Ethernet fiber optic modules to provide the fiber optic pathway. This allows the same converter to be used for 1000Base fiber connections over both multimode and singlemode fiber optic cables atdifferent span lengths by merely sliding in an appropriate SFP module. A number of different SFP modules are available for various multimode or singlemode fiber applications.

The 065-1096 is a switching media converter that auto-negotiates speed and duplex mode on its twistedpair connection. 10BaseT, 100BaseTX, or 1000BaseT connections are automatically speed and duplex mode matched to the Gigabit Ethernet fiber optic connections.

Key Features

• Switch-defeatable Link Fault Signaling (LFS) to operate in concert with managed Ethernet switches.
• Alarm and status LEDs to monitor both the fiber link and the twisted-pair copper link.
• SFP slot allows flexible, cost-effective, and easy Gigabit Ethernet fiber link configuration.
• Supports auto-negotiation of speed and duplex mode plus Auto MDI/MDI-X on the RJ-45 port.
• Distance extension from 220 meters up to 110 km is possible in full duplex mode.

Specifications

• APPLICABLE STANDARDS

IEEE 802.3 (10BaseT Ethernet);
IEEE 802.3u (100BaseTX & 100BaseFX Fast Ethernet);
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX

• PORTS

1 x RJ-45 Twisted Pair; 10/100/1000BaseT/TX
1 x 1000Base SFP module slots

• DATA RATES

Twisted Pair: 10 Mbps, 100 Mbps, or 1000 Mbps
Fiber SFP Slot: 1000 Mbps

• DISTANCES SPANNED

Copper: 100 meters
Fiber: 220 meters to 80 km; varies based upon fiber type and SFP model chosen for use.
Please Note: Fiber span distances shown are for typical field conditions. Please use the link power budget
specifications shown in the SFP module specifications for meaningful comparisons between competing products.

• STATUS LEDs

PWR (green): Illuminates under normal operation.
ALM (red): Illuminated when failure occurs on any fiber link or on Link Fault Signaling (LFS).
LNK/ACT (green): Illuminated when receiving link pulses from compliant devices; flashing when data packets are being transmitted or received. Fiber port indicator is located on the front panel; copper port indicator is located in the upper right corner of the RJ-45 jack.
1000 (green): Illuminated when the copper port has auto-negotiated to 1000BaseT speed; located in the upper left corner of the RJ-45 jack.

• PERFORMANCE

Latency: < 4.2 Bs (LIFO)
Throughput @ 100Base: 148,810 pps (64-byte packets)
Throughput @ 1000Base: 1,488,100 pps (64-byte packets)

• ENVIRONMENT

Operating:
Temperature: 32?F to 122?F (0?C to 50?C)
Relative Humidity: 10% to 90%, non-condensing
Non-Operating/Storage:
Temperature: -4?F to 158?F (-20?C to 70?C)
Relative Humidity: 5% to 90%, non-condensing

• ELECTRICAL REQUIREMENTS

Operating Voltage: 9 - 32 Volts DC
Power Supply: 12 Volts DC, 0.8 A

• PHYSICAL CHARACTERISTICS

Dimensions: 4.30 x 2.91 x 0.92 inches [D x W x H] (109.2 x 73.8 x 23.4mm)
Weight: 0.35 lbs. (160 grams)

• EMISSIONS

FCC Part 15 of Class A & CE approved

• WARRANTY

Lifetime

Downloads

Download Datasheet (PDF839 Kb) Revised 08.25.2008

Download User?s Guide (PDF 1 Mb) Revised 08.19.2008

Ordering Information

Part Number	Description
065-1096	10/100/1000BaseT/TX to 1000Base SFP Gigabit Media Converter (Requires SFP Modules shown below for operation)
065-79SXMG	1000BaseSX SFP Module - MM/LC, 220m Span on 62.5Bm Fiber / 550m Span on 50Bm Fiber **
065-79SXEDMG	1000BaseSX SFP Module 1310 nm - MM/LC, 2 km **
065-79LXMG	1000BaseLX SFP Module 1310 nm - SM/LC, 10 km **
065-79LXEDMG	1000BaseLX SFP Module 1310 nm - SM/LC, 40 km **
065-79XDMG	1000BaseXD SFP Module 1550 nm - SM/LC, 40 km **
065-79ZXMG	1000BaseZX SFP Module 1550 nm - SM/LC, 80 km **
065-79EZXMG	1000BaseEZX SFP Module 1550 nm - SM/LC, 110 km **