Overview

Signamax Connectivity Systems' 065-74xx series 5-Port, 8-Port, & 9-Port 10/100 Unmanaged Hardened Industrial DIN-rail Mount Switches have been developed to operate in harsh industrial environments that require ruggedized equipment that can operate in severe temperature extremes. These switches are an affordable solution for outdoor environments, transportation roadside systems, shop floors, and other harsh environments where consistent operation at temperature extremes of -40?F to 167?F (-40?C to 75?C) is necessary. These unmanaged switches are compact, plug-and-play devices that do not require complex user setup.

Key Features

• Meets NEMA TS1 and TS2 Environmental Requirements for Traffic Control Equipment.
• Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
• UL 1604 Class 1, Division 2 Classified for use in hazardous locations.
• 10/100 Mbps - Full/Half Duplex, Auto-Negotiation, Auto-MDIX.
• 2048 MAC Addresses, 768K bits Buffer Memory, Full Wire-Speed Performance.
• Alarms for Power Failure and Port Link Failure via Relay Output.
• Redundant 1.5 Amp rated, 24 V DC Terminal Block Power Inputs.(120-240V AC hardened external power supply sold separately.)
• Supports DIN-rail or Panel Mount installations.

Specifications

• APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX / 100BaseFX
IEEE 802.3x Flow Control and Back pressure

• FIXED PORTS

All Models: 5 (model 065-7405TB) or 8 (models 065-7408ATB, 065-74091FXSCTB, and 065-74091FXSTTB) twisted-pair ports meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications; Category 5 or better cable, 100 meters maximum distance for 100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT. Auto MDI/MDI-X and Auto-Negotiation Function supported.
Models 065-74091FXSCTB and 065-74091FXSTTB: 1 100BaseFX port, 2 km Span, with SC Multimode (model 065-74091FXSC) or ST Multimode (model 065-74091FXST) connectors.

• LED STATUS INDICATORS

Global: Power1 (Green), Power2 (Green), Fault (Red)
10/100BaseT/TX Ports: Link/Activity (Green), 100 Mbps Speed (Amber)
100BaseFX Port (Models 065-74091FXSCTB and 065-74091FXSTTB): Link/Activity (Green), 100 Mbps Speed (Amber)

• SWITCH ARCHITECTURE

Store and Forward
Buffer Memory:768 kbits
2,048 MAC Addresses

• PERFORMANCE

Forwarding Rate: 14,880 pps for 10 Mbps, 148,800 pps for 100 Mbps
Latency: less than 7.1 ?s

• CERTIFICATIONS

Safety: UL1604: Classified for ITE Equipment for use in hazardous locations:
Class 1, Division 2 group A, B, C, & D: Temp Code T4A; -25C < Tamb < 74C
EN 60950-1, IEC 60950-1; IEC 61000-6-2

EMI: FCC Part 15 Class A; EN61000-6-2; EN61000-6-3

EMS:
ESD Standards (IEC 61000-4-2):
Enclosure Contact: + / - 4KV; Criteria B;
Enclosure Air: + / - 8KV; Criteria B

Radiated FRI Standards (IEC 61000-4-3):
Enclosure Ports: 10V/m, 80 to 1000 MHz, 80% AM; Criteria A

Burst Standards (IEC 61000-4-4):
Enclosure Ports: + / - 4KV @ 2.5 KHz; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
A.C. Power Ports: + / - 4KV; Criteria B

Surge Standards (IEC 61000-4-5):
Signal Ports: + / - 1KV; Line-to-line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / - 2KV; Line-to-earth; Criteria B

Induced RFI Standards (IEC 61000-4-6):
Signal Ports: 10V RMS @ 0.15-80 MHz, 80% AM; Criteria A
D.C. Power Ports: 10V RMS @ 0.15-80 MHz, 80% AM; Criteria A
A.C. Power Ports: 10V RMS @ 0.15-80 MHz, 80% AM; Criteria A
Earth Ground Ports: 10V RMS @ 0.15 - 80 MHz, 80% AM; Criteria A

Magnetic Field Standards (IEC 61000-4-8):
30A/m @ 50, 60 Hz; Criteria A

Voltage Dip Standards (IEC 61000-4-11):
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B

Environmental Test Compliance:
Vibration Resistance (IEC 60068-2-6fc):
5G @ 150 Hz (Operation/Storage/Transport); Criterion 3

Shock (IEC 60068-2-27):
25G @ 11ms (Half-Sine Shock Pulse; Operation);
50G @ 11ms (Half-Sine Shock Pulse; Storage/Transport)

Free Fall (IEC 60068-2-32 Ed): 1 Meter (3.281 ft.)

NEMA TS1/2 Environmental Requirements for Traffic Control Equipment

• PHYSICAL CHARACTERISTICS

Dimensions: 1.97 in.W x 5.35 in. Hx 4.33 in.D (50 mm x 136 mm x 110 mm)
Housing: IP30 protection, metal case
Weight: 1.76 lb (0.8 kg.)

• INSTALLATION

Included DIN-rail mount. Optional wall mounting bracket available by special order.

• ELECTRICAL CHARACTERISTICS

Maximum Power Consumption: 18.72 Watts
Maximum Current Drawn: 12 V DC @ 0.99 A, 24 V DC @ 0.55 A, 48 V DC @ 0.39 A
DC Input Range: 12 to 48 V DC, connected via redundant terminal block. Optional hardened power supply sold separately.

• ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: -40?F to 167?F (-40?C to 75?C)
Storage Temperature: -50?F to 200?F (-45?C to 93?C)
Operating Humidity: 10 to 95% (non-condensing)

• WARRANTY

5 years

Downloads

Download Datasheet (PDF1.5 Mb) Revised 07.31.2008

Download User's Guide (PDF407 Kb) Revised 08.01.2008

Ordering Information